Constant Current Power Supplies – Clutch/Brake Torque Range 18-30 (lb-ft)

The power supply is suitable for Placid Industries brakes up to 220 lb.-in. & clutches up to 130 lb.-in. torque. The power supply is a constant current type, with a 3/4 turn potentiometer for setting output current from 0% to 100%. The cutput current can also be controlled with a 0-10 Volt Input Signal or Follower Arm Potentiometer. The SPAN adjustments set maximum and minimum current levels.

Typical Applications
  • Used with Magnetic particle brakes & clutches and hysteresis brakes.
  • Current levels are maintained regardless of brake or clutch coil resistance or changes due to heating.
Power
  • Input 110 & 220 VAC available
  • Output 24 & 30 Volts available
Application Assistance Request Quote

Enclosed Power Supplies

Models Input Voltage
(AC)
Maximum Input Current
(Amps AC)
Output Voltage
(DC)
Downloads Cycle
(hz)
Downloads
Models
PST2-24-110
Input Voltage
(AC)
110
Maximum Input Current
(Amps AC)
2
Output Voltage
(DC)
0-24
Downloads
15
Cycle
(hz)
50/60
Downloads
Models
PST2-24-220
Input Voltage
(AC)
220
Maximum Input Current
(Amps AC)
2
Output Voltage
(DC)
0-24
Downloads
22
Cycle
(hz)
50/60
Downloads
Models
PSH2-30-110
Input Voltage
(AC)
110
Maximum Input Current
(Amps AC)
2
Output Voltage
(DC)
0-30
Downloads
15
Cycle
(hz)
50/60
Downloads
Models
PSH2-30-220
Input Voltage
(AC)
220
Maximum Input Current
(Amps AC)
2
Output Voltage
(DC)
0-30
Downloads
22
Cycle
(hz)
50/60
Downloads