• Power Supplies

Power Supplies

For – Magnetic particle brakes & clutches and hysteresis brakes.
Precise – Current levels are maintained regardless of brake or clutch coil resistance changes due to heating.
Input – 110 & 220 VAC versions available.

PC-12-MC Enclosed Power Supply
Constant Current Power Supplies - Torque Range 0-220 (lb-in)

PS

  • 24 Volt, 0.75 Amp  &  12 Volt, 1.25 Amp versions
    For all our small brakes & clutches
  • Easy to use – The Span adjustment scales output current for small or larger brakes & clutches.

Control Output Current via –

  • Knob (Potentiometer)
  • 0-10 Volt Signal – from computer or PLC
  • Follower Arm Potentiometer  F-12-6
  • Ultrasonic Sensor  U-B.

 

The Placid Ind. follower arm or ultrasonic sensor connects to the supply for constant tension unwinding / rewinding applications.

More Info

Constant Current Power Supplies - Torque Range 18-30 (lb-ft)

PST

  • 24 Volts,  2, 3, 4 Amp versions
    For large brakes & clutches or multiple smaller ones.

Control Output Current via –

  • Knob (Potentiometer)
  • 0-5 volt,  0-10 volt  or  4-20mA DC Signal

More Info

Constant Current Power Supplies - Torque Range 130-300 (lb-ft)

PSH

  • 30 Volts, 2, 3, 5 Amp versions
    For large brakes & clutches or multilple smaller ones.

Control Output Current or Output Voltage via –  Knob (Potentiometer)

More Info